Morrisflex
Morrisflex Double Cut miniature 10-piece carbide burr set
MORFLX-HQ-10X3MM-6
A 10-piece miniature Double Cut carbide burr set with Ø3 mm shanks for small parts, narrow slots and hard-to-reach areas.
A brand from Ireland
Morrisflex is a carbide burr brand originating in Ireland and now part of ATA Group. The company specialises in tungsten carbide burrs for stock removal, deburring and finishing parts after machining. The Morrisflex catalogue covers many head shapes, cut patterns, shank sizes and material-specific versions. KTD focuses on the Morrisflex carbide burr range for work on steel, stainless, non-ferrous metals, castings and complex profiles that conventional abrasives cannot reach.
Product lines KTD supplies
- Carbide burrs in many head shapes and cut patterns
- Long-shank and small-diameter burrs for hard-to-reach areas
- Burrs matched to the material and the stock removal required
Key strengths
- Wide choice of shapes, shank sizes and cut configurations
- Options for fast stock removal or fine finishing
- Pairs with grinders at the correct speed and collet size
Typical applications
- Deburring, profile correction and weld cleaning
- Machining steel, stainless, cast iron, aluminium and non-ferrous metals
- Finishing castings, moulds and engineered components
Morrisflex products
Showing 18 products
Morrisflex
Morrisflex Double Cut 10-piece carbide burr set
MORFLX-AL-10X6MM-6
A 10-piece Double Cut carbide burr set with Ø6 mm shanks in 7 shapes, covering flat and curved surfaces, slots and corners.
Morrisflex
Morrisflex Double Cut 40-piece carbide burr display case
MORFLX-AT-40X6MM-6
A 40-piece Double Cut carbide burr display case with Ø6 mm shanks, 5 shapes and 4 cutting diameters, ideal for retail counters.
Morrisflex
Morrisflex Double Cut 5-piece carbide burr set
MORFLX-BK-5X6MM-6
A 5-piece Double Cut carbide burr set with Ø6 mm shanks in popular shapes, supplied in a compact, easy-to-carry case.
Morrisflex
Morrisflex long-shank cylinder carbide burr with end cut
KB61225-6-175
Long-shank cylinder carbide burr with end cut for machining side faces and the bottoms of slots and deep cavities.
Morrisflex
Morrisflex long-shank cylinder carbide burr without end cut
KA61225-6-175
Long-shank cylinder carbide burr without end cut for grinding flat surfaces and deburring in deep, hard-to-reach areas.
Morrisflex
Morrisflex ball-nosed tree carbide burr
KF61225-6
Ball-nosed tree carbide burr that reaches contours, slots and radiused corners without leaving sharp corners at the contact point.
Morrisflex
Morrisflex pointed tree carbide burr
KG61230-6
Pointed tree carbide burr whose tapered body reaches narrow corners, slots and other areas with limited access.
Morrisflex
Morrisflex ball-nosed cone carbide burr
KL61228-6
14° ball-nosed cone carbide burr for reaching slots and inclined faces and machining internal radii without sharp corners.
Morrisflex
Morrisflex ball carbide burr
KD61212-6
Ball carbide burr for grinding concave surfaces, internal radii, holes and curved profiles on moulds and mechanical parts.
Morrisflex
Morrisflex cone carbide burr
KM61222-6
28° cone carbide burr tapering to a point, suited to grinding tapered holes, V-grooves, narrow corners and inclined faces.
Morrisflex
Morrisflex flame carbide burr
KH61232-6
Flame carbide burr, widest in the middle and tapering at both ends, for shaping curved surfaces, contours and profiles.
Morrisflex
Morrisflex oval carbide burr
KE61220-6
Oval carbide burr with a rounded, tapered head that follows curved surfaces, ideal for contouring and edge rounding.
Morrisflex
Morrisflex cylinder carbide burr with end cut
KB61225-6
Cylinder carbide burr with end cut that works on both side and end, suited to flat surfaces, shoulders and slot bottoms.
Morrisflex
Morrisflex ball-nosed cylinder carbide burr
KC61225-6
Ball-nosed cylinder carbide burr for machining both side faces and internal radii, giving smooth transitions between surfaces.
Morrisflex
Morrisflex cylinder carbide burr without end cut
KA61225-6
Cylinder carbide burr without end cut, designed for grinding flat surfaces and side edges and deburring metal parts.
Morrisflex
Morrisflex 60° countersink carbide burr
KJ61210-6
60° countersink carbide burr for chamfering hole edges and removing burrs after drilling on moulds and mechanical parts.
Morrisflex
Morrisflex 90° countersink carbide burr
KK61206-6
90° countersink carbide burr for producing countersinks, deburring around holes and cleaning part edges after drilling.
